- 4 5/16” overall length
- 4 1/4” diameter flange, both ends
- Slip ring coupled
- Internal zero velocity speed sensor
- (optional)
- SAE 4340 alloy steel construction with satin nickel finish
- Supplied with mating connector
Short Axis Flange Driven Slip Ring Torque Sensor Model T351
10 in stock
Description
The T351 was designed for in-line testing of propellers, pumps, drivelines, and other devices where there is minimal axial space available for the torque sensor. The slip ring allows the use of either AC carrier or DC strain gage signal conditioning electronics. The optional zero velocity speed sensor is installed inside the T351 housing. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the T351 with customer-supplied electronics for a fee.
Additional information
| Model | T351-110, T351-231 |
|---|---|
| Capacity | 5K Ib-in, 10K Ib-in, 20K lb-in |
| Size | Small |
Specifications
| Rated Capacity | 5K, 10K, 20K lb-in |
| Rated Speed | 8,000 rpm |
| Nonlinearity | 0.10% of rated output |
| Hysteresis | 0.10% of rated output |
| Nonrepeatability | 0.05% of rated output |
| Rated Output, typical | 2 mV/V |
| Zero Balance | +/-1% of rated output |
| Temperature Range, operating | -65 to +200 F |
| Temperature Range, compensated | +70 to +170 F |
| Temperature Effect on Output | 0.002% of load/F |
| Temperature Effect on Zero | 0.002% of rated output/F |
| Bridge Resistance, typical | 350 ohms |
| Excitation Voltage, bridge, typical | 10 VDC or VAC rms |
| Excitation Voltage, bridge, maximum (1) | 20 VDC or VAC rms |
| Insulation Resistance, bridge to case | >5000 megohms at 50 VDC |
| Input voltage, speed sensor, Vcc (optional) (2) | 4.5 to 24 VDC |
| Maximum Load, safe (3) | 150% of rated capacity |
| Maximum Load, ultimate (4) | 300% of rated capacity |
| Deflection at Rated Capacity, typical | 0.15 degrees of arc |
| Number of Bridges | 1 |
| Weight | 15 lbs |
| Construction | SAE 4340 alloy steel with satin nickel finish |
