Capacities from 150 to 500K lb-in
High stiffness and low inertia
Compatible with AC or DC electronics
Internal zero velocity speed sensor (optional)
SAE 4340 alloy steel construction with satin nickel finish
Supplied with mating connector
$5,110.00 – $18,250.00
The T360 Series slip ring torque sensors were designed for the measurement of viscosity and for in-line testing of motors, engines, transmissions, propellers, pumps, drivelines, and similar rotating devices. The T360 Series has 20% to 40% greater stiffness, has 4 to 6 times less rotating inertia, and is 1/3 the size of comparable models available from other suppliers. The slip ring allows the use of either AC carrier or DC strain gage signal conditioning electronics. The optional zero velocity speed sensor is installed inside the T360 Series housing. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the T360 Series with customer-supplied electronics for a fee.
Model | T360, T361, T362, T363, T364 |
---|
Rated Capacity | 150, 300, 500, 1K, 2K, 3K, 5K, 10K, 20K, 50K, 100K, 200K, 500K lb-in |
Rated Speed | 6,500 (T360, T361, T362), 5,600 (T363), 4,800 (T364) rpm |
Nonlinearity | 0.05% of rated output |
Hysteresis | 0.05% of rated output |
Nonrepeatability | 0.02% of rated output |
Rated Output, bridge, typical | 2 mV/V |
Zero Balance | +/-0.5% of rated output |
Temperature Range, operating | -20 to +200 F |
Temperature Range, compensated | +68 to +170 F |
Temperature Effect on Output | 0.001% of load/F |
Temperature Effect on Zero | 0.001% of rated output/F |
Bridge Resistance, typical | 350 ohms |
Excitation Voltage, bridge, typical | 10 VDC or VAC rms |
Excitation Voltage, bridge, maximum (1) | 20 VDC or VAC rms |
Insulation Resistance, bridge to case | >5000 megohms at 50 VDC |
Input voltage, speed sensor, Vcc (optional) (2) | 4.5 to 24 VDC |
Maximum Load, safe (3) | 200% of rated capacity |
Maximum Load, ultimate (4) | 400% of rated capacity |
Number of Bridges | 1 |
Weight | 5.5 lb (T360), 11 lb (T361), 17.5 lb (T362), 25 lb (T363), 38 lb (T364), add 1 lb for i200 |
Construction | SAE 4340 alloy steel with satin nickel finish |