Rotary Transformer Coupled Sprocket\Pulley Torque Sensor Model T211

///Rotary Transformer Coupled Sprocket\Pulley Torque Sensor Model T211

Rotary Transformer Coupled Sprocket\Pulley Torque Sensor Model T211


  • 2.25” long sensor body – 6.2” overall Weighs 7 lbs.
  • On-board shunt calibration circuit
  • Angle encoder (optional)
  • SAE 4340 alloy steel – satin nickel finish

Get your Free Quote Now!


The T211 was originally designed to provide feedback information for control of textile machinery. It features a rotary transformer coupled torque sensor and requires AC strain gage signal conditioning such as SensorData’s i200. The optional angle encoder provides precise feedback of shaft position and rotational speed. SensorData’s T211 Sprocket/Pulley Torque Sensor can be provided in a number of different configurations with capacities from 500 to 10K lb-in and rated speeds up to 10,000 rpm. Contact our representative or the factory to discuss your specific requirements. After consultation with a factory representative SensorData will be pleased to provide the customer with a practical solution for his or her special needs for a sprocket/pulley torque sensor.

Additional information


T211-106, T211-231, T211-107, T211-231




Rated Capacity500, 1K, 2K lb-in
Rated Speed8,000 rpm
Nonlinearity0.1% of rated output
Hysteresis0.1% of rated output
Nonrepeatability0.05% of rated output
Rated Output, typical2 mV/V
Zero Balance+/-1% of rated output
Temperature Range, operating-20 to +220 F
Temperature Range, compensated+68 to +220 F
Temperature Effect on Output0.002% of load/F
Temperature Effect on Zero0.002% of rated output/F
Excitation2.8 to 5 VAC rms, 3 kHz to 5 kHz
Insulation Resistance, bridge to case>5000 megohms at 50 VDC
Maximum Load, safe (1)200% of rated capacity
Maximum Load, ultimate (2)400% of rated capacity
Number of Bridges1
Weight7 lbs
Construction SAE 4340 alloy steel with satin nickel finish