Flange Reaction Torque Sensor Model T120

///Flange Reaction Torque Sensor Model T120

Flange Reaction Torque Sensor Model T120

$1,950.00$2,290.00

  • High torsional stiffness
  • 0.1% accuracy
  • Compact design – 2 OAD X 1.75 OAL
  • Capacities from 50 to 1000 lb-in SAE 4340 Alloy Steel
  • Supplied with mating connector

Get your Free Quote Now!

SKU: T120 Categories: ,

Description

The compact T120 is designed for measuring non-rotating reaction torque values associated with motors, pumps, and similar devices, and ridged drive shafts with small amounts of rotation. The T120 with inherent low-end measurement capability can be installed at the driver or absorber end of the measurement chain. AC carrier or DC strain gage signal conditioning electronics can be used with the T120. Interconnecting cable assemblies are available as an option. In-house calibration of the T120 with SensorData electronics will be provided free of charge or with customer-supplied electronics for a fee.

Additional information

Model

T120-106, T120-107

Weight

1 Ib

Capacity

50 Ib-in, 100 lb-in, 200 Ib-in, 500 Ib-in, 1K lb-in

Specifications

Rated Capacity50, 100, 200, 500, 1K lb-in
Nonlinearity0.10% of rated output
Hysteresis0.10% of rated output
Nonrepeatability0.05% of rated output
Rated Output, typical2.00 mV/V
Zero Balance+/-1% of rated output
Temperature Range, operating-65 to +200 F
Temperature Range, compensated+70 to +170 F
Temperature Effect on Output0.002% of load/F
Temperature Effect on Zero0.002% of rated output/F
Bridge Resistance, typical350 ohms
Excitation Voltage, bridge, typical10 VDC or VAC rms
Excitation Voltage, bridge, maximum (1)20 VDC or VAC rms
Insulation Resistance, bridge to case>5000 megohms at 50 VDC
Maximum Load, safe (2)200% of rated capacity
Maximum Load, ultimate (3)400% of rated capacity
Torsional Stiffness, typicalSee table next page
Extraneous Loads, maximumSee table next page
Number of Bridges1
Weight<1 lb
Construction SAE 4340 Alloy Steel