Fatigue Rated Shaft Coupled Reaction Torque Sensor T160

///Fatigue Rated Shaft Coupled Reaction Torque Sensor T160

Fatigue Rated Shaft Coupled Reaction Torque Sensor T160

  • High torsional stiffness
  • 1.5” W X 2.25” H (incl receptacle) X 4” L
  • 0.1% accuracy
  • Capacities 150 to 3K lb-in
  • SAE 4340 Alloy Steel
  • Supplied with mating connector

Get your Free Quote Now!

This product is currently out of stock and unavailable.

SKU: T160 Categories: ,


SensorData’s T160 shaft coupled reaction torque sensor was designed for a wide variety of applications requiring small package size, high torsional stiffness and where there is a small degree of angular rotation or reciprocating motion involved. The T160 with inherent low-end measurement capability can be installed at the driver or absorber end of the measurement chain. Double-keyed shafts on each end assist installation. AC carrier or DC strain gage signal conditioning electronics can be used with the T160. Interconnecting cable assemblies are available as an option. In-house calibration of the T160 with SensorData’s electronics will be provided free of charge or with customer-supplied electronics for a fee.

Additional information


150 Ib-in, 300 Ib-in, 500 Ib-in 1K Ib-in, 2K Ib-in, 3K lb-in




1 lb


Rated Capacity150, 300, 500, 1K, 2K, 3K lb-in
Nonlinearity0.10% of rated output
Hysteresis0.10% of rated output
Nonrepeatability0.05% of rated output
Rated Output, typical2.00 mV/V
Zero Balance+/-1% of rated output
Temperature Range, operating-65 to +200 F
Temperature Range, compensated+70 to +170 F
Temperature Effect on Output0.002% of load/F
Temperature Effect on Zero0.002% of rated output/F
Bridge Resistance, typical350 ohms
Excitation Voltage, bridge, typical10 VDC or VAC rms
Excitation Voltage, bridge, maximum (1)20 VDC or VAC rms
Insulation Resistance, bridge to case>5000 megohms at 50 VDC
Maximum Load, safe (2)150%
Maximum Load, ultimate (3)300%
Torsional Stiffness, typicalSee table next page
Extraneous Loads, maximumSee table next page
Number of Bridges1
Weight 1 lb
Construction SAE 4340 Alloy Steel