- High torsional stiffness
- Fatigue rated
- 1% accuracy
- Capacities 1K to 1000K lb-in
- SAE 4340 Alloy Steel
- Supplied with mating connector
Fatigue Rated Flange Coupled Reaction Torque Sensor Model T150, T153, T155, T156, T157
$2,207.00 – $11,850.00
Description
SensorData’s T150 Series of fatigue rated flange coupled torque sensors is designed for use during life testing and “test-to-failure” of drive-line components and where there is a small degree of angular rotation or reciprocating motion involved. The T150 Series with inherent low-end measurement capability can be installed at the driver or absorber end of the measurement chain. Each flange face is provided with a pilot diameter to assist installation. AC carrier or DC strain gage signal conditioning electronics can be used with the T150 Series. Interconnecting cable assemblies are available as an option. In-house calibration of the T150 Series with SensorData’s electronics will be provided free of charge or with customer-supplied electronics for a fee.
Specifications
Rated Capacity
| 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K, 500K, 1000K lb-in
|
Nonlinearity | 0.10% of rated output |
Hysteresis | 0.10% of rated output |
Nonrepeatability | 0.05% of rated output |
Rated Output, typical | 2.00 mV/V |
Zero Balance | +/-1% of rated output |
Temperature Range, operating | -65 to +200 F |
Temperature Range, compensated | +70 to +170 F |
Temperature Effect on Output | 0.002% of load/F |
Temperature Effect on Zero | 0.002% of rated output/F |
Bridge Resistance, typical | 350 ohms |
Excitation Voltage, bridge, typical | 10 VDC or VAC rms |
Excitation Voltage, bridge, maximum (1) | 20 VDC or VAC rms |
Insulation Resistance, bridge to case | >5000 megohms at 50 VDC |
Maximum Load, safe (2) | 150% |
Maximum Load, ultimate (3) | 300% |
Torsional Stiffness, typical | See table next page |
Extraneous Loads, maximum | See table next page |
Number of Bridges | 1 |
Weight | Consult factory |
Construction | SAE 4340 Alloy Steel |