- Low inertial mass and high stiffness
- Deflection less than 0.002 inch
- Height 6.5 inch & diameter 10.75 inch
- Crosstalk less than 2%
- SAE 4340 alloy steel construction with satin nickel finish
- Supplied with mating connectors
Torque/Thrust Sensor Model M260-106
1 in stock
Description
The M260-106 was designed for use in material testing machines. The torque/thrust sensor provides a sensing structure with low inertial mass and high stiffness, low crosstalk between the torque and thrust measurements and resistance to the negative effects of extraneous forces in both measurement axes. The M260-106 can be used with AC carrier or DC strain gage signal conditioning electronics. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the M260-106 with customer-supplied electronics for a fee. The M260-106 is available in special configurations and capacities on a special order basis; please contact SensorData with your torque/thrust measurement requirements.
Additional information
Capacities | 500 Nm torque & 150 KN thrust, 1100 Nm torque & 100 KN thrust |
---|
Specifications
Rated Capacity (1) | 500 Nm torque & 150 KN thrust, 1100 Nm torque & 100 KN thrust |
Nonlinearity | 0.15% of rated output, both axes |
Hysteresis | 0.15% of rated output, both axes |
Nonrepeatability | 0.05% of rated output, both axes |
Rated Output, typical | 1.5 mV/V, both axes |
Zero Balance | +/-1% of rated output, both axes |
Temperature Rang, operating | -65 to +200 F, both axes |
Temperature Range, compensated | +70 to +170 F, both axes |
Temperature Effect on Output | 0.002% of load/F, both axes |
Temperature Effect on Zero | 0.002% of rated output/F, both axes |
Input Impedance, minimum | 750 ohms torque axis, 350 ohms thrust axis |
Output Impedance | 700 +/-5 ohms, both axes |
Excitation Voltage, typical | 10 VDC or VAC rms, both axes |
Excitation Voltage, maximum (2) | 20 VDC or VAC rms, both axes |
Insulation Resistance | >5000 megohms at 50 VDC, both axes |
Maximum Load, safe (3) | 150% of rated capacity, both axes |
Maximum Load, ultimate (4) | 300% of rated capacity, both axes |
Deflection at Rated Capacity, typical | 0.0015 in, both axes |
Crosstalk | <2%, both axes |
Number of Bridges | 2 |
Weight | 67 lb |
Construction | SAE 4340 alloy steel with satin nickel finish |