Fatigue Rated Torque\Thrust Sensor Model M211-116

//Fatigue Rated Torque\Thrust Sensor Model M211-116

Fatigue Rated Torque\Thrust Sensor Model M211-116

  • Fully fatigue rated
  • Deflection less than 0.002 inch
  • Height 2.3 inch and diameter 3.75 inch
  • Crosstalk less than 2%
  • SAE 4340 alloy steel construction with satin nickel finish
  • Supplied with mating connectors

Get your Free Quote Now!

This product is currently out of stock and unavailable.

SKU: M211-116 Category:

Description

The M211-116 was designed for use in material testing machines. The torque/thrust sensor provides a small package size, a fully fatigue rated structure with low inertial mass and high stiffness, low crosstalk between the torque and thrust measurements and resistance to the negative effects of extraneous forces in both measurement axes. The M211-116 can be used with AC carrier and DC strain gage signal conditioning electronics. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the M211-116 with customer-supplied electronics for a fee. The M211116 is available in non-standard rated capacities on a special order basis; please contact SensorData with your torque/thrust measurement requirements.

Additional information

Capacities

1K lb-in torque & 5K lbs thrust, 1K lb-in torque & 2K lbs thrust, 100 lb-in torque & 200 lbs thrust

Specifications

Rated Fatigue Capacity1K lb-in torque & 5K lbs thrust, 1K lb-in torque & 2K lbs thrust, 100 lb-in torque & 200 lbs thrust
Nonlinearity0.15% of rated output, both axes
Hysteresis0.15% of rated output, both axes
Nonrepeatability0.05% of rated output, both axes
Rated Output, typical2 mV/V, both axes
Zero Balance+/-1% of rated output, both axes
Temperature Rang, operating-65 to +200 F, both axes
Temperature Range,  compensated+70 to +170 F, both axes
Temperature Effect on Output0.002% of load/F, both axes
Temperature Effect on Zero0.002% of rated output/F, both axes
Input Impedance, minimum750 ohms, both axes
Output Impedance700 +/-5 ohms, both axes
Excitation Voltage, typical10 VDC or VAC rms, both axes
Excitation Voltage, maximum (1)20 VDC or VAC rms, both axes
Insulation Resistance>5000 megohms at 50 VDC, both axes
Maximum Load, safe (2)150% of rated capacity, both axes
Maximum Load, ultimate (3)300% of rated capacity, both axes
Deflection at Rated Capacity, typical0.002 in, both axes
Crosstalk<2%, both axes
Fatigue Rating, full fatigue capacity tension to full fatigue capacity compression load108 cycles
Number of Bridges2
Weight
ConstructionSAE 4340 alloy steel with satin nickel finish