- Thru-hole design
- Height 2 inches and diameter 4 inches
- Nonlinearity & hysteresis 0.15%
- Deflection less than 0.002 inches
- SAE 4340 alloy steel construction with satin nickel finish
- Supplied with mating connector
Hollow Compression load cell Model F502
Description
The F502 is a hollow compression load cell used for press calibration; bolt force measurements; material testing applications; civil engineering projects; rolling and reduction mill applications; and suspension weighing. The F502 can be mounted on flat surfaces; with leg mounts passing through the hollow center; over studs and bolts; or with the load applied to the top surface of the load cell by suspending the weight through the load cell’s hollow center. The F502 can be used with AC carrier and DC strain gage signal conditioning electronics. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the F502 with customer-supplied electronics for a fee.
Additional information
Capacities | 5K, 10K, 20K, 25K, 50K, 100K |
---|
Specifications
Rated Capacity | 5K, 10K, 20K, 25K, 50K, 100K lbs |
Nonlinearity | 0.15% of rated output |
Hysteresis | 0.15% of rated output |
Nonrepeatability | 0.05% of rated output |
Rated Output, typical | 2 mV/V |
Zero Balance | +/-1% of rated output |
Temperature Range, operating | -65 to +200 F |
Temperature Range, compensated | +70 to +170 F |
Temperature Effect on Output | 0.002% of load/F |
Temperature Effect on Zero | 0.002% of rated output/F |
Input Impedance, minimum | 750 ohms |
Output Impedance | 700 +/-5 ohms |
Excitation Voltage, typical | 10 VDC or VAC rms |
Excitation Voltage, maximum (1) | 20 VDC or VAC rms |
Insulation Resistance | >5000 megohms at 50 VDC Maximum Load, safe (2) |
150% of rated capacity | |
Maximum Load, ultimate (3) | 300% of rated capacity Deflection at Rated Capacity, typical |
0.002 in Number of Bridges | 1, 2ndbridge optional |
Weight | 1 lb |
Construction | SAE 4340 alloy steel with satin nickel finish |