Hydraulic Actuator Load Cell Model F654

///Hydraulic Actuator Load Cell Model F654

Hydraulic Actuator Load Cell Model F654

  • Resistant to the effects of bending and off-center loading
  • Tension & compression operation
  • 4.5” overall height & 1.5” overall diameter
  • 1-14 UNF-2A & 1-14 UNF-2B threads
  • SAE 4340 alloy steel construction with satin nickel finish
  • Supplied with mating connector

Get your Free Quote Now!

This product is currently out of stock and unavailable.

SKU: F654 Categories: ,


The F654 is designed for use in-line with hydraulic actuators. The F654 sensing element has proved, in actual tests, to be highly resistant to the effects of bending and off-center loading. The F654 is mechanically interchangeable with competitor’s products and is compatible with AC Carrier and DC strain gage signal conditioning electronics.

Additional information


5K, 10K, 15K, 20K, 25K


1 Ib




Rated Capacity5K, 10K, 15K, 20K, 25K lbs
Nonlinearly0.25% of rated output
Hysteresis0.15% of rated output
Nonrepeatability0.05% of rated output
Rated Output, typical2 mV/V
Zero Balance+/-1% of rated output
Temperature Range, operating-65 to +200 F
Temperature Range, compensated+70 to +170 F
Temperature Effect on Output0.002% of load/F
Temperature Effect on Zero0.002% of rated output/F
Input Impedance, minimum380 ohms
Output Impedance350 +/-3.5 ohms
Excitation Voltage, typical10 VDC or VAC rms
Excitation Voltage, maximum (1)20 VDC or VAC rms
Insulation Resistance>5000 megohms at 50 VDC
Maximum Load, safe (2)150% of rated capacity
Maximum Load, ultimate (3)300% of rated capacity
Deflection at Rated Capacity, typical0.003 in
Fatigue rating, full fatigue tension to full fatigue compression108 cycles
Number of Bridges1
Weight, lbs1.5
Construction SAE 4340 alloy steel with satin nickel finish