- Small diameter
- Deflection less than 0.002 inch
- Integral convex load button
- SAE 4340 alloy steel construction with satin nickel finish
- Supplied with mating connector
COMPRESSION LOAD CELL MODEL F200
Description
The F200 is a canister style load cell used for press calibration; material testing; tank, bin and hopper weighing; and rolling and reduction mill applications. The overall diameter is less than 2.5 inches, and the overall height is 3.5 inches. The F200 includes an integral hardened steel convex load button. The F200 can be used with AC carrier and DC strain gage signal conditioning electronics. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the F200 with customer-supplied electronics for a fee.
Additional information
Capacities | 5K, 10K, 20K, 50K |
---|
Specifications
Rated Capacity 5K, 10K, 20K, 50K lbs Nonlinearity 0.15% of rated output
Hysteresis 0.10% of rated output
Nonrepeatability 0.03% of rated output
Rated Output, typical 2 mV/V Zero Balance +/-2% of rated output
Temperature Range, operating -65 to +200 F Temperature Range, compensated +70 to +170 F Temperature Effect on Output 0.002% of load/F Temperature Effect on Zero 0.002% of rated output/F
Input Impedance, minimum 380 ohms Output Impedance 350 +/-5 ohms
Excitation Voltage, typical 10 VDC or VAC rms
Excitation Voltage, maximum (1) 20 VDC or VAC rms
Insulation Resistance >5000 megohms at 50 VDC Maximum Load, safe (2) 150% of rated capacity
Maximum Load, ultimate (3) 300% of rated capacity Deflection at Rated Capacity, typical 0.002 in
Number of Bridges 1
Weight 2 lb
Construction SAE 4340 alloy steel with satin nickel finish